How to Land the DJI Avata: A Step-by-Step Guide

DJI Avata is a powerful drone that can perform various aerial maneuvers. However, landing the drone can be a challenging task for many pilots. In this guide, we will take you through the step-by-step process of landing the DJI Avata drone safely.

Pre-Landing Checklist

Before you begin the landing process, it is essential to make sure that the drone is in good condition and that you have enough battery life to complete the landing procedure. Here’s a pre-landing checklist that you should follow:

  1. Check the drone’s battery level and make sure it has enough power to land safely.
  2. Verify that the DJI Avata is in the GPS mode, which is essential for a safe landing.
  3. Ensure that the drone’s camera lens is clean and clear, as this will improve visibility during the landing process.
  4. Check the drone’s altitude and adjust it to an appropriate height for landing.

Landing Procedure

Now that you have completed the pre-landing checklist, it’s time to begin the landing procedure.

Step 1: Slowly decrease the drone’s altitude

Start by decreasing the drone’s altitude slowly. Use the controller’s throttle to decrease the altitude in small increments, and make sure to keep the drone level during the descent.

Step 2: Use the DJI Avata’s sensors

The DJI Avata has advanced sensors that can help you during the landing process. The sensors will detect obstacles and adjust the drone’s altitude and speed accordingly.

Step 3: Use the DJI Avata’s landing gear

The DJI Avata comes with landing gear that can help you land the drone safely. As you approach the ground, make sure that the landing gear is extended, and gently touch the ground.

Step 4: Turn off the drone’s motors

Once the DJI Avata has landed safely, it’s time to turn off the drone’s motors. Use the controller to stop the motors, and then remove the battery from the drone.

Before landing the DJI Avata, make sure to complete the following checklist:

Checklist ItemAction Required
Check battery levelEnsure that the drone has enough power to land safely.
Verify GPS modeMake sure the DJI Avata is in GPS mode for a safe landing.
Clean the camera lensEnsure the camera lens is clean and clear for visibility.
Adjust drone altitudeSet an appropriate altitude for a safe landing.
Extend landing gearMake sure that the DJI Avata’s landing gear is extended.
Use DJI Avata’s sensorsUse the drone’s sensors to detect obstacles during landing.
Turn off drone’s motorsStop the DJI Avata’s motors after landing.


Landing the DJI Avata can be a challenging task, but by following these steps, you can safely land your drone every time. Remember to complete the pre-landing checklist, use the DJI Avata’s sensors, and extend the landing gear to ensure a safe landing. By following these tips, you can enjoy flying your DJI Avata with confidence.

Leave a Comment